PEMANFAATAN LIMBAH SABUT KELAPA ( Cocos nucifera L) DAN SERAT TANDAN KOSONG KELAPA SAWIT (Elais guineensis JACQ) SEBAGAI KOMBINASI BAHAN BAKU PEMBUATAN PAPAN PARTIKEL

Adam Maulana(1), Udiantoro Udiantoro(2), Lya Agustina(3*)

(1) Teknologi Industri Pertanian, Universitas Lambung Mangkurat
(2) Teknologi Industri Pertanian, Universitas Lambung Mangkurat
(3) Teknologi Industri Pertanian, Universitas Lambung Mangkurat
(*) Corresponding Author

Sari


The utilization of coconut fiber that has not been optimal is one of the opportunities so that the waste has added value, one of which is to process it into particle board.  Objective research is to best composition particle board making from coconut coir waste material and TKKS to produce qualified particle board. The method used was a complete randomized design (RAL) with 3 treatment, single factor treatment ie the composition of raw materials in the form of coconut husk and TKKS. Comparison of the particle-making composition of particle board P0: 100% coco fiber: 0% of oil palm empty bunch fibers, P1: 75% : 25%, P2: 50% : 50%, P3: 25% : 75%, P4: 0% : 100%. Best results the combination of raw material composition of particle board is in the treatment of P0 (100% coco fiber: 0% of oil palm empty bunch fiber) with a density value of 0.43 g / cm³, moisture content 7.0%, Modulus of Elasticity - MoE 2.037.45 kg / cm2 and the Modulus of Rupture - MoR 46.14 kg / cm².


Kata Kunci


Papan partikel, limbah, kelapa, kelapa sawit

Teks Lengkap:

PDF

Referensi


Amelia, S. 2009. Pengaruh Perendaman Panas dan dingin Sabut Kelapa Terhadap Kualitas Papan Partikel Yang Dihasilkannya [Skripsi]. Fakultas Kehutanan. Institut Pertanian Bogor. Bogor.

Amin, S. 2009. Cocopreneurship. Aneka Peluang Bisnis dari Kelapa. Liliy Publisher. Yogyakarta.

Bowyer JL, Shmulsky, Haygreen JG. 2003. Forest Products and Wood Science - An Introduction, Fourth edition. Iowa State University Press.

Ditjenbun. 2014. Statistik Perkebunan Indonesia. http://ditjenbun.pertanian.go.idhttp://ditjenbun.pertanian.go.id. Diakses 02 April 2016 di Banjarbaru.

Kamal, N. 2012. Karakterisasi Dan Potensi Pemanfaatan Limbah Sawit. Teknik Kimia, ITENAS. Bandung.

Maloney TM. 1993. Modern Particleboard and Dry process Fiberboard Manufacturing. MILLER Freeman, Inc. San Fransisco.

Massijaya Y.M dan Setyawati D. 2005. Pengembangan papan komposit berkualitas tinggi dari sabut kelapa dan polipropilena daur ulang (I): Suhu dan waktu kempa panas. J. Teknologi Hasil Hutan 18(2): 91-101.

Nuryawan, A. 2007. Sifat Fisis dan Mekanis OSB dari Kayu Akasia, Ekaliptus, dan Gmelina Berdiameter Kecil [Tesis]. Program Pascasarjana. Institut Pertanian Bogor. Bogor.

Pizzi. 1983. Wood Adhesives, Chemistry and Technology. Mareel Dekker, Inc. New York.

Ramadhani, S. 2011. Pengaruh penambahan serat sabut kelapa terhadap parameter kuat geser tanah berpasir. J. SMARTek 9(3):187–195.

Sari N.M. 2011. Pengaruh banyaknya lapisan pada kayu tempelan utuh dan kayu tempelan tidak utuh terhadap pengujian kadar air, delaminasi dan geser horizontal kayu galam. J. Chlorophyl 7(1):56-63

Saleh A, Pakpahan M. M. D, Angelina N. 2009. Pengaruh konsentrasi pelarut, temperatur dan waktu pemasakan pada pembuatan pulp dari sabut kelapa muda. J. Teknik Kimia 16(3):34-44.

Wardhani, I.S, S. Surjokusumo, Y.S Hadi dan N, Nugroho. 2004. Distribution of chemical compounds of coconut wood (Cocos nucifera L.). J. Ilmu dan Teknologi Kayu Tropis 2 (1).

Wahyono, S., F.L. Sahwan, J.H. Martono, dan F. Suyanto. 2008. Tinjauan terhadap perkembangan penelitian pengolahan limbah padat pabrik kelapa sawit. J. Teknik Lingkungan Edisi Khusus: 64-74.




DOI: http://dx.doi.org/10.31602/zmip.v44i1.1724

Refbacks

  • Saat ini tidak ada refbacks.


##submission.copyrightStatement##

 

    

 

 

This work is licensed under a Creative Commons Attribution 4.0 International License.