KAJIAN LITERATUR: KARAKTER PADUAN LOGAM BERBASIS Mg UNTUK APLIKASI BIOMEDIS

Rachmadhani Rachmadhani

doi:10.31602/dl.v6i3.11926

KAJIAN LITERATUR: KARAKTER PADUAN LOGAM BERBASIS Mg UNTUK APLIKASI BIOMEDIS

Rachmadhani Rachmadhani^(1*)

(1) Universitas Pendidikan Ganesha
(*) Corresponding Author

Sari

Aplikasi biomedis dalam pembuataan perangkat medis semakin meningkat dan terus berkembang pesat. Biomaterial berupa logam sudah banyak diteliti dan memiliki potensi untuk aplikasi biomedis. Mg merupakan logam yang mudah terurai dan biokompatibilas untuk aplikasi biomedis karena mencegah resiko inflamasi dan sitotoksitas di tubuh manusia. Penggunaan paduan logam berbasis Mg menjadi salah satu cara dalam pengaplikasian biomedis untuk mencegah laju degradasi yang disebabkan karena mudahnya korosi dan berkurangnya sifat mekanik material tersebut sebelum mengalami penyembuhan. Penggunaan logam Kajian literatur ini membahas terkait karakter paduan logam berbasis Mg, berupa Mg-Ca, Mg-Sn, Mg-Cu, dan Mg-Ca-Sn berdasarkan karakter mikrostruktur, fase, sifat mekanik, dan korosi suatu material.

Teks Lengkap:

PDF

Referensi

Alaneme, K. K., Kareem, S. A., Olajide, J. L., Sadiku, R. E., & Bodunrin, M. O. (2022). Computational biomechanical and biodegradation integrity assessment of Mg-based biomedical devices for cardiovascular and orthopedic applications: A review. International Journal of Lightweight Materials and Manufacture, 5(2), 251-266.

Bairagi, D., & Mandal, S. (2022). A comprehensive review on biocompatible Mg-based alloys as temporary orthopaedic implants: Current status, challenges, and future prospects. Journal of Magnesium and Alloys, 10(3), 627-669.

Bommala, V. K., Krishna, M. G., & Rao, C. T. (2019). Magnesium matrix composites for biomedical applications: A review. Journal of Magnesium and Alloys, 7(1), 72-79.

Erryani, A., Yulianti, Thaha, Y. N., Lestari, F. P., Syahid, A. N., & Hakim, R. N. (2020). Sintesis material implan biokomposit PLA-ABS-Mg: Sifat mekanik, mikrostruktur, dan perilaku elektrokimia. Metalurgi, 3, 89–98.

Esmaily, M., Svensson, J. E., Fajardo, S., Birbilis, N., Frankel, G. S., Virtanen, S., Arrabal, R., Thomas, S., & Johansson, L. G. (2017). Fundamentals and advances in magnesium alloy corrosion. Progress in Materials Science, 89, 92-193.

Lestari, F. P., Kartika, I., Juwono, A. L., & Anawati, A. (2022). Kajian KompositBerbasis Paduan Logam Magnesium Berpenguat Keramik untuk Aplikasi Ortopedi. Teknik, 43(3), 236–253.

Li, X., Chu, C. L., Liu, L., Liu, X. K., Bai, J., Guo, C., Xue, F., Lin, P. H., & Chu, P. K. (2015). Biodegradable poly-lactic acid based-composite reinforced unidirectionally with high-strength magnesium alloy wires. Biomaterials, 49, 135–144.

Liu, C., Fu, X., Pan, H., Wan, P., Wang, L., Tan, L., Wang, K., Zhao, Y., Yang, K., & Chu, P. K. (2016). Biodegradable Mg-Cu alloys with enhanced osteogenesis, angiogenesis, and long-lasting antibacterial effects. Scientific Reports, 6(1), 27374–27391.

Liu, Y. C., Liu, D. B., Zhao, Y., & Chen, M. F. (2015). Corrosion degradation behavior of Mg-Ca alloy with high Ca content in SBF. Transactions of Nonferrous Metals Society of China (English Edition), 25(10), 3339-3347.

Liu, Y., Lu, B., & Cai, Z. (2019). Recent Progress on Mg- And Zn-Based Alloys for Biodegradable Vascular Stent Applications. Journal of Nanomaterials, 2019(6), 1-16.

O’Neill, E., Awale, G., Daneshmandi, L., Umerah, O., & Lo, K. W. H. (2018). The roles of ions on bone regeneration. Drug Discovery Today, 23(4), 879-890.

Sezer, N., Evis, Z., Kayhan, S. M., Tahmasebifar, A., & Koç, M. (2018). Review of magnesium-based biomaterials and their applications. Journal of Magnesium and Alloys, 6(1), 23-43.

Sukmana, I., Hermanto, A., & Burhanuddin, Y. (2016). Aplikasi Logam Magnesium dan Paduannya Sebagai Material Baut Tulang Mampu Luruh. Proceeding Seminar Nasional Tahunan Teknik Mesin XV (SNTTM XV), 727–732.

Suresh, K., Rao, K. P., Prasad, Y. V. R. K., Hort, N., & Kainer, K. U. (2013). Microstructure and mechanical properties of as-cast Mg-Sn-Ca alloys and effect of alloying elements. Transactions of Nonferrous Metals Society of China (English Edition), 23(12), 3604–3610.

Verma, A., & Ogata, S. (2023). Magnesium based alloys for reinforcing biopolymer composites and coatings: A critical overview on biomedical materials. Advanced Industrial and Engineering Polymer Research (Article in Press). https://doi.org/10.1016/j.aiepr.2023.01.002

Walke, S., Kale, V. M., Patil, P. P., Giri, J. M., Kumar, H., Kumar, M., & Arun, V. (2023). Effects of alloying element on the mechanical behavior of Mg-MMCs: A review. Materials Today: Proceedings (Article in Press) https://doi.org/10.1016/j.matpr.2023.02.211

Wang, C., Zeng, L., Zhang, W., Tang, F., Ding, W., Xiao, S., & Liang, T. (2021). Enhanced mechanical properties and corrosion resistance of rolled Mg-1.5Sn-0.5Ca alloy by Ce microalloying. Materials Characterization, 179, 111335-111335.

Wang, Y., Liu, G., Wei, Y., & Qiao, Y. (2020). Effects of magnesium-calcium alloys with different calcium content on their mechanical properties. IOP Conference Series: Materials Science and Engineering, 735(1).

Xu, L., Liu, X., Sun, K., Fu, R., & Wang, G. (2022). Corrosion Behavior in Magnesium-Based Alloys for Biomedical Applications. Materials, 15(7), 2613-2643.

Zhang, T., Wang, W., Liu, J., Wang, L., Tang, Y., & Wang, K. (2022). A review on magnesium alloys for biomedical applications. Frontiers in Bioengineering and Biotechnology, 10, 1-25.

Zhao, C., Pan, F., & Pan, H. (2016). Microstructure, mechanical and bio-corrosion properties of as-extruded Mg–Sn–Ca alloys. Transactions of Nonferrous Metals Society of China (English Edition), 26(6), 1574–1582.

Zhou, H., Liang, B., Jiang, H., Deng, Z., & Yu, K. (2021). Magnesium-based biomaterials as emerging agents for bone repair and regeneration: from mechanism toapplication. Journal of Magnesium and Alloys, 9(3), 779-804.

Zhou, Y., Wu, P., Yang, Y., Gao, D., Feng, P., Gao, C., Wu, H., Liu, Y., Bian, H., & Shuai, C. (2016). The microstructure, mechanical properties and degradation behavior of laser-melted Mg-Sn alloys. Journal of Alloys and Compounds, 687, 109–114.

DOI: http://dx.doi.org/10.31602/dl.v6i3.11926