KESETIMBANGAN ADSORPSI ISOTERMIS LOGAM Cr (VI) PADA FLY ASH

Saripah sobah(1*), Fitria Fitria(2), Yano Hurung Anoi(3), Diana Diana(4), Precast Octavianus(5)

(1) Program Studi Teknik Kimia Sekolah Tinggi Teknologi Industri Bontang, Jl Brigjend Katamso No. 40, Bontang
(2) Program Studi Teknik Kimia Sekolah Tinggi Teknologi Industri Bontang, Jl Brigjend Katamso No. 40, Bontang
(3) Program Studi Teknik Mesin Sekolah Tinggi Teknologi Industri Bontang, Jl Brigjend Katamso No. 40, Bontang
(4) Laboratorium P.T. Pupuk kalimatan Timur, Jl. James Simandjuntak No.1, Bontang
(5) Laboratorium P.T. Pupuk kalimatan Timur, Jl. James Simandjuntak No.1, Bontang
(*) Corresponding Author

Abstract


The Purpose of this study was to determine the optimum adsorption time of fly ash from the PT. Pupuk Kaltim in adsorbing Cr metal, optimal stirring speed, and optimal weight of fly ash under isothermic conditions in batches using the Langmuir equation has been carried out at atmospheric conditions, temperature 27oC. Fly ash varies in weight and stirring speed. The filtrate was added with 2 mL of 0.1% NH4Cl after equilibrium, then analyzed using AAS AA-7000. The optimal adsorption time of fly ash in adsorbing Cr metal is 60 minutes. The optimal adsorption weight of fly ash is in 50 mL of Cr solution is 2 grams with an average efficiency value of 91.22%. The optimum stirring speed of fly ash to adsorb Cr metal is 200 rpm.

 

Keywords: isothermic adsorption, fly ash, Cr metal




DOI: http://dx.doi.org/10.31602/ajst.v6i2.4842

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 AL ULUM JURNAL SAINS DAN TEKNOLOGI

E-ISSN  2477- 4731

Al Ulum: Jurnal Sains dan teknologi = Al Ulum: Jurnal Science and Technology by Islamic University of Kalimantan is licensed under a Creative Commons Attribution 4.0 International License. Based on a work at http://ojs.uniska-bjm.ac.id/index.php/JST.